SUP Accessories

Sealed. Reliable. Ready. There's nothing worse than reaching the water, ready to paddle, only to watch your board slowly go soft. A failing valve is one of the most common reasons an inflatable board lets you down, and it almost always happens at the worst possible moment. The POP replacement valve for inflatable paddle boards solves that problem before it starts, restoring a firm, confident hold so your iSUP performs the way it was meant to, season after season. This is the kind of small, smart upgrade that pays for itself many times over. Rather than retiring a board you love or hoping a stubborn leak fixes itself, you keep a trusted paddleboard valve replacement close and stay ready for whatever the day brings. For paddlers who'd rather be on the water than waiting on shipping, having a reliable inflatable SUP valve on hand is simple peace of mind, and an easy way to protect every adventure you've already planned. Key Features: Universal Compatibility: Fits most inflatable paddleboards, docks, and planks with standard valve systems High-Quality Construction: Durable materials engineered to withstand repeated inflation, deflation, and pressure cycles Air-Tight Seal: Precision-built to prevent leaks and hold proper inflation pressure Easy Installation: Installs with basic tools by following the manufacturer's instructions Essential Spare Part: Ideal to keep on hand for emergency repairs or preventive maintenance Corrosion Resistant: Built to resist both saltwater and freshwater corrosion Reliable Performance: Maintains air pressure for extended periods without leakage Standard Size: Compatible with most inflatable water sports equipment Durable Materials: Stands up to UV exposure, temperature swings, and regular use Cost-Effective Solution: Extends the life of your inflatable gear without replacing the whole board Specifications: Compatible With: Inflatable stand-up paddleboards (iSUPs), inflatable docks and floating platforms, inflatable planks and water mats, and other inflatable water sports equipment with standard valve systems. Replace Your Valve When: Air is leaking, or pressure won't hold, the cap is lost or damaged, the mechanism is stuck or hard to operate, the threads are stripped or worn, or fresh components are needed for a new season. Smart To Replace Before: Extended trips, peak-season use, or stocking spares for rental operations and frequent paddling. Installation Note: Replacement may require basic tools and specific installation steps. Frequently Asked Questions Will the POP replacement valve for inflatable paddle boards fit my paddleboard? It's designed to fit most inflatable paddleboards, docks, and planks that use standard valve systems. Before ordering, check your board's existing valve against a standard size, or reach out to our team, and we'll help you confirm compatibility. Do I need special tools to install it? No, installation can be done with basic tools by following your manufacturer's instructions. If you're unsure about the process, consult your inflatable equipment's manual or contact the manufacturer for detailed installation guidance. Why should I keep a spare valve on hand? A faulty valve can cut a paddling day short. Having a replacement ready means you can fix a leak quickly instead of waiting on parts or constantly re-inflating your board — essential peace of mind for frequent paddlers, rental operations, and extended trips. Will the POP replacement valve for inflatable paddle boards hold up to saltwater and sun? Yes. The valve is corrosion-resistant for both saltwater and freshwater use and built to handle UV exposure, temperature changes, and repeated pressure cycles. How do I know it's time to replace my valve? Replace it if your valve is leaking air, won't hold pressure, has a lost or damaged cap, feels stuck or hard to operate, or has stripped or worn threads. It's also smart to swap in a fresh valve before extended trips or at the start of a new season.

Secure. Spare. Paddle On. Nobody thinks about their rigid paddleboard fin screw until it's gone. One slips loose in the parking lot, rolls under a seat, and suddenly your fin won't stay put, and your session is over before it starts. The POP rigid SUP fin screw is a little set of replacement fin screws that is the quiet hero of your gear bag, the part that keeps your fin anchored to your rigid SUP or surfboard, so you can actually get on the water when you show up to ride. Think of it as cheap insurance for every paddle day. Toss a set in your bag, leave one in the car, and you'll never be the person watching the waves with a wobbly fin. With the POP rigid SUP fin screw, you're trading a few dollars for the confidence that your US fin box stays locked, your fin stays protected, and your time on the water stays yours. Stock up once, and paddle on without a second thought. Key Features Complete 2-Pack Set: Includes 2 fin screws and 2 square washer plates, giving you a full set for replacing lost hardware or keeping spares ready for the next surprise. Built for Rigid Boards: Designed for rigid paddleboards and surfboards (not inflatables) with standard US fin box systems found on most SUPs and surfboards. Fin-Protecting Square Washers: Square washer plates distribute pressure evenly and prevent the screw from pulling through or damaging your fin material. Essential Replacement Hardware: These screws are tiny, easy to drop, and impossible to paddle without — a must-have backup for any rider. Beach-Day Insurance: Keep spares in your gear bag, because losing a fin screw at the beach can mean you're not paddling that day. Specifications What You Get: 2 fin screws and 2 square washer plates Quantity: 2 screws, 2 washers Type: Standard fin box screws Compatibility: Rigid paddleboards and surfboards with US fin boxes Material: Metal screws with square washer plates Board Type: Rigid boards only (not for inflatable paddleboards) Frequently Asked Questions Will the POP rigid SUP fin screw fit my rigid paddleboard? If your board has a US fin box system with screw-in fins (not thumbscrews), yes. This is the standard setup on most rigid SUPs and surfboards, so these screws should slot right in. Are these for inflatable or rigid boards? Rigid boards only. Inflatable boards use thumbscrews, which are a different system. These are standard screws designed specifically for rigid-board US fin boxes. Why do I need the washer plates? The square washers distribute pressure and prevent the screw from pulling through the fin material. Without them, you risk damaging your fin or having the screw fail mid-session. How many fins will this cover? This 2-pack covers 2 fins. Most boards run 1–3 fins, so depending on how many screws you've lost, you may want more than one pack. Can I use these on surfboards? Yes, these POP rigid SUP fin screws work on surfboards with US fin boxes too. It's the same screw system used on rigid paddleboards.

Convert. Sit. Explore. Want kayaking versatility without buying or storing a second boat? The POP Kayak Paddle and Seat Set is the SUP to kayak conversion bundle that turns the paddleboard you already own into a comfortable, fully seated kayak in minutes. Clip the premium inflatable seat to your board's D-rings, grab the included fiberglass kayak paddle, and you've got two watercraft in one. Stand and paddle in SUP mode, then sit back and glide in kayak mode — ideal for fishing, long-distance touring, or simply relaxing on the water. The POP kayak paddle and seat set is the easiest, most affordable way to unlock sit-down paddling comfort without the cost, weight, or storage hassle of owning a separate kayak. Key Features Complete SUP-to-Kayak Conversion: Transform the paddleboard you already own into a comfortable kayak with one convenient bundle. Comfortable Seated Paddling: Tour, fish, or cruise for hours without the fatigue of standing, perfect for extended, relaxed sessions on the water. Bundle Savings Included: Buying the seat and paddle together costs less than purchasing each component separately, so you spend more time on the water for less money. Versatile Two-in-One Watercraft: Switch between standing (SUP mode) and sitting (kayak mode) on the same trip, adapting instantly to conditions, fatigue level, or activity. Compatibility: Works with any paddleboard that has D-ring mounting points (typically 4 D-rings). Most inflatable SUPs and many hard boards come with D-rings, so check your board for attachment points before purchasing. Fishing Stability: The seated position lowers your center of gravity for steady casting and reeling, with backrest support during long sessions. Specifications What's Included: A premium inflatable kayak seat with backrest, D-ring attachment straps, and a fiberglass kayak paddle Adjustable Fit: Adjustable seat to fit different board widths (for a secure, customized setup) Seat Design: Inflatable construction with a supportive backrest Paddle Material: Lightweight, durable fiberglass Frequently Asked Questions Will this fit my paddleboard? It fits virtually any SUP with D-ring mounting points — typically the 4 D-rings found on most inflatable boards and many hard boards. Check your deck for D-rings before ordering, and the adjustable straps will handle different board widths. Do I need any tools to set it up? No tools required. Clip the seat straps to your board's D-rings, inflate the seat, attach the paddle, and you're ready to paddle in minutes. Is the POP Kayak Paddle and Seat Set good for fishing? Yes. The seated position lowers your center of gravity for steady, stable casting and reeling, and the backrest keeps you comfortable through long sessions on the water. Can I still use my board as a stand-up paddleboard? Absolutely. The seat clips on and off easily, so you can paddle standing in SUP mode and switch to seated kayak mode whenever you like — even on the same trip. Does it come with a paddleboard? No. The POP kayak paddle and seat set is a conversion bundle (seat and paddle only), designed to work with the paddleboard you already own.

Attach. Sit. Explore. Some of the best days on the water happen slowly. With the POP Kayak Seat, your stand-up paddleboard becomes a relaxed, seated ride in minutes, so you can drift through a quiet cove, cast a line, or simply soak in the calm without your legs ever asking for a break. It's the easiest way to turn the SUP you already love into two boards in one, no second watercraft, no compromise, just more reasons to stay out longer. This paddleboard kayak seat is made for paddlers who want comfort to keep pace with adventure, whether you're introducing the kids to the water or chasing the horizon solo. If standing all day has ever cut a trip short, this is the upgrade that changes everything. Clip it on, settle in, and rediscover how good a long, easy paddle can feel. Your next outing on the water just got a whole lot more inviting. Key Features Universal D-ring Attachment: Fits virtually any paddleboard you already own. So, no new gear is required. Ergonomic Back Support: Paddle longer distances without fatigue or lower back strain. Lightweight and Packable: Stows easily on your board or in a bag without adding bulk to your kit. Stable Seated Position: Stay balanced and in control even on open water or mild chop. Instant Conversion, No Tools: Switch between standing and sitting in seconds and paddle your way. Specifications Type: Universal sit-down kayak seat for stand-up paddleboards Compatibility: Any SUP or paddleboard with standard front and rear D-rings Attachment system: 4-point adjustable straps with quick-release buckles Outer material: Water-resistant 600D polyester Padding: High-density EVA foam seat base and backrest Backrest height: Approx. 16 in (40.6 cm) for full lower- and mid-back support Adjustable straps: Yes — fully tunable for fit and seating angle Weight capacity: Up to 330 lbs (150 kg) Color: Black / charcoal Care: Rinse with fresh water after use, air dry Frequently Asked Questions Will the POP Kayak Seat fit my paddleboard? If your board has standard front and rear D-rings (which the vast majority of SUPs do), the seat will fit. The four adjustable straps clip directly to those rings, so there's no drilling, gluing, or permanent modification required. Do I need any tools to install it? None at all. The seat attaches in minutes using quick-release buckles. You can switch between standing and seated paddling in seconds, right out on the water. Will it slide around or tip me off balance? No. Once the four straps are tensioned, the seat holds a stable, low-profile position that keeps you centered. It's designed to stay secure even on open water or mild chop. Is it comfortable enough for long paddles? Yes, that's the whole point. The high-density EVA padding and ergonomic backrest support your lower and mid back so you can paddle farther without fatigue or strain. Can I leave it on my board, or should I remove it? Either works. The POP kayak seat is light and packable, so you can stow it on the board, toss it in a bag, or leave it attached between sessions. Just rinse it with fresh water and air dry after use to keep it in top shape.

Roll. Carry. Go. Anyone who has wrestled a damp paddleboard back into a too-small bag knows how a great day can sour in the parking lot, usually with gear left behind because nothing else would fit. The POP iSUP backpack with wheels ends that struggle for good. This rolling paddleboard travel bag was built roomy on purpose, so your board and all its gear slide in without a fight and come out ready for the water. Roll it up, drop it in, zip it shut, and you're done. Getting there is the easy part, too. Glide it across airport floors and trailheads, then switch to backpack mode the moment a remote launch calls for a hike. Tough enough to shrug off pavement, gravel, and baggage handlers alike, this inflatable SUP bag is made to travel as hard as you do. For wandering paddlers and weekend explorers who want their board wherever they go, the POP iSUP backpack with wheels finally makes the journey feel effortless. Key Features Generous Capacity: Holds inflatable boards up to 11'6" plus your pump, paddle, fins, and personal gear, so nothing gets crammed or left at home. Easy Fit Every Time: Sized so your board slides back in without the wrestling match, no perfect compression required. Rugged Rolling Wheels: Built for airports, parking lots, and trails so you can roll the full load instead of hauling it on your back. Backpack Straps for Hiking: Padded shoulder and hip straps distribute weight evenly for comfortable carries into backcountry lakes and remote spots. TSA Check-In Friendly: Sized as regular baggage, so you can fly with your board and skip oversized fees and special handling. Rip-Stop Fabric Build: Durable construction stands up to dragging, tossing, and travel abuse, trip after trip. Non-Corrosive Plastic Zipper: Heavy-duty and salt-resistant, so it won't corrode the way metal zippers do. Specifications Capacity: Inflatable boards up to 11'6" Material: Rip-stop fabric Zipper: Heavy-duty plastic (non-corrosive) Carry Options: Wheels, shoulder straps, hip straps Use: Airport travel, hiking, trails, beach transport Frequently Asked Questions Will my 11' board fit in the POP iSUP backpack with wheels? Yeah, it holds boards up to 11'6", so an 11' board fits with room to spare for your pump, paddle, and other gear. Can I check this on a flight? Yes, it's TSA-friendly and sized for regular baggage check-in. You won't need to pay oversized baggage fees or deal with special handling. Is it actually easy to fit the board back in? That's the whole point. The bag is sized generously, so you're not fighting to compress everything perfectly. Roll it up, put it in, zip it. Done. Can I carry this as a backpack? Absolutely. The POP iSUP backpack with wheels has shoulder straps and hip straps for backpack-style carrying when you need to hike to remote launch spots or can't roll it. Will the wheels handle rough terrain? They're designed for trails, sidewalks, and airport floors. Not mountain bike terrain, but they handle gravel paths, parking lots, and uneven surfaces fine.