Accessories

Sealed. Reliable. Ready. There's nothing worse than reaching the water, ready to paddle, only to watch your board slowly go soft. A failing valve is one of the most common reasons an inflatable board lets you down, and it almost always happens at the worst possible moment. The POP replacement valve for inflatable paddle boards solves that problem before it starts, restoring a firm, confident hold so your iSUP performs the way it was meant to, season after season. This is the kind of small, smart upgrade that pays for itself many times over. Rather than retiring a board you love or hoping a stubborn leak fixes itself, you keep a trusted paddleboard valve replacement close and stay ready for whatever the day brings. For paddlers who'd rather be on the water than waiting on shipping, having a reliable inflatable SUP valve on hand is simple peace of mind, and an easy way to protect every adventure you've already planned. Key Features: Universal Compatibility: Fits most inflatable paddleboards, docks, and planks with standard valve systems High-Quality Construction: Durable materials engineered to withstand repeated inflation, deflation, and pressure cycles Air-Tight Seal: Precision-built to prevent leaks and hold proper inflation pressure Easy Installation: Installs with basic tools by following the manufacturer's instructions Essential Spare Part: Ideal to keep on hand for emergency repairs or preventive maintenance Corrosion Resistant: Built to resist both saltwater and freshwater corrosion Reliable Performance: Maintains air pressure for extended periods without leakage Standard Size: Compatible with most inflatable water sports equipment Durable Materials: Stands up to UV exposure, temperature swings, and regular use Cost-Effective Solution: Extends the life of your inflatable gear without replacing the whole board Specifications: Compatible With: Inflatable stand-up paddleboards (iSUPs), inflatable docks and floating platforms, inflatable planks and water mats, and other inflatable water sports equipment with standard valve systems. Replace Your Valve When: Air is leaking, or pressure won't hold, the cap is lost or damaged, the mechanism is stuck or hard to operate, the threads are stripped or worn, or fresh components are needed for a new season. Smart To Replace Before: Extended trips, peak-season use, or stocking spares for rental operations and frequent paddling. Installation Note: Replacement may require basic tools and specific installation steps. Frequently Asked Questions Will the POP replacement valve for inflatable paddle boards fit my paddleboard? It's designed to fit most inflatable paddleboards, docks, and planks that use standard valve systems. Before ordering, check your board's existing valve against a standard size, or reach out to our team, and we'll help you confirm compatibility. Do I need special tools to install it? No, installation can be done with basic tools by following your manufacturer's instructions. If you're unsure about the process, consult your inflatable equipment's manual or contact the manufacturer for detailed installation guidance. Why should I keep a spare valve on hand? A faulty valve can cut a paddling day short. Having a replacement ready means you can fix a leak quickly instead of waiting on parts or constantly re-inflating your board — essential peace of mind for frequent paddlers, rental operations, and extended trips. Will the POP replacement valve for inflatable paddle boards hold up to saltwater and sun? Yes. The valve is corrosion-resistant for both saltwater and freshwater use and built to handle UV exposure, temperature changes, and repeated pressure cycles. How do I know it's time to replace my valve? Replace it if your valve is leaking air, won't hold pressure, has a lost or damaged cap, feels stuck or hard to operate, or has stripped or worn threads. It's also smart to swap in a fresh valve before extended trips or at the start of a new season.

Secure. Spare. Paddle On. Nobody thinks about their rigid paddleboard fin screw until it's gone. One slips loose in the parking lot, rolls under a seat, and suddenly your fin won't stay put, and your session is over before it starts. The POP rigid SUP fin screw is a little set of replacement fin screws that is the quiet hero of your gear bag, the part that keeps your fin anchored to your rigid SUP or surfboard, so you can actually get on the water when you show up to ride. Think of it as cheap insurance for every paddle day. Toss a set in your bag, leave one in the car, and you'll never be the person watching the waves with a wobbly fin. With the POP rigid SUP fin screw, you're trading a few dollars for the confidence that your US fin box stays locked, your fin stays protected, and your time on the water stays yours. Stock up once, and paddle on without a second thought. Key Features Complete 2-Pack Set: Includes 2 fin screws and 2 square washer plates, giving you a full set for replacing lost hardware or keeping spares ready for the next surprise. Built for Rigid Boards: Designed for rigid paddleboards and surfboards (not inflatables) with standard US fin box systems found on most SUPs and surfboards. Fin-Protecting Square Washers: Square washer plates distribute pressure evenly and prevent the screw from pulling through or damaging your fin material. Essential Replacement Hardware: These screws are tiny, easy to drop, and impossible to paddle without — a must-have backup for any rider. Beach-Day Insurance: Keep spares in your gear bag, because losing a fin screw at the beach can mean you're not paddling that day. Specifications What You Get: 2 fin screws and 2 square washer plates Quantity: 2 screws, 2 washers Type: Standard fin box screws Compatibility: Rigid paddleboards and surfboards with US fin boxes Material: Metal screws with square washer plates Board Type: Rigid boards only (not for inflatable paddleboards) Frequently Asked Questions Will the POP rigid SUP fin screw fit my rigid paddleboard? If your board has a US fin box system with screw-in fins (not thumbscrews), yes. This is the standard setup on most rigid SUPs and surfboards, so these screws should slot right in. Are these for inflatable or rigid boards? Rigid boards only. Inflatable boards use thumbscrews, which are a different system. These are standard screws designed specifically for rigid-board US fin boxes. Why do I need the washer plates? The square washers distribute pressure and prevent the screw from pulling through the fin material. Without them, you risk damaging your fin or having the screw fail mid-session. How many fins will this cover? This 2-pack covers 2 fins. Most boards run 1–3 fins, so depending on how many screws you've lost, you may want more than one pack. Can I use these on surfboards? Yes, these POP rigid SUP fin screws work on surfboards with US fin boxes too. It's the same screw system used on rigid paddleboards.

Convert. Sit. Explore. Want kayaking versatility without buying or storing a second boat? The POP Kayak Paddle and Seat Set is the SUP to kayak conversion bundle that turns the paddleboard you already own into a comfortable, fully seated kayak in minutes. Clip the premium inflatable seat to your board's D-rings, grab the included fiberglass kayak paddle, and you've got two watercraft in one. Stand and paddle in SUP mode, then sit back and glide in kayak mode — ideal for fishing, long-distance touring, or simply relaxing on the water. The POP kayak paddle and seat set is the easiest, most affordable way to unlock sit-down paddling comfort without the cost, weight, or storage hassle of owning a separate kayak. Key Features Complete SUP-to-Kayak Conversion: Transform the paddleboard you already own into a comfortable kayak with one convenient bundle. Comfortable Seated Paddling: Tour, fish, or cruise for hours without the fatigue of standing, perfect for extended, relaxed sessions on the water. Bundle Savings Included: Buying the seat and paddle together costs less than purchasing each component separately, so you spend more time on the water for less money. Versatile Two-in-One Watercraft: Switch between standing (SUP mode) and sitting (kayak mode) on the same trip, adapting instantly to conditions, fatigue level, or activity. Compatibility: Works with any paddleboard that has D-ring mounting points (typically 4 D-rings). Most inflatable SUPs and many hard boards come with D-rings, so check your board for attachment points before purchasing. Fishing Stability: The seated position lowers your center of gravity for steady casting and reeling, with backrest support during long sessions. Specifications What's Included: A premium inflatable kayak seat with backrest, D-ring attachment straps, and a fiberglass kayak paddle Adjustable Fit: Adjustable seat to fit different board widths (for a secure, customized setup) Seat Design: Inflatable construction with a supportive backrest Paddle Material: Lightweight, durable fiberglass Frequently Asked Questions Will this fit my paddleboard? It fits virtually any SUP with D-ring mounting points — typically the 4 D-rings found on most inflatable boards and many hard boards. Check your deck for D-rings before ordering, and the adjustable straps will handle different board widths. Do I need any tools to set it up? No tools required. Clip the seat straps to your board's D-rings, inflate the seat, attach the paddle, and you're ready to paddle in minutes. Is the POP Kayak Paddle and Seat Set good for fishing? Yes. The seated position lowers your center of gravity for steady, stable casting and reeling, and the backrest keeps you comfortable through long sessions on the water. Can I still use my board as a stand-up paddleboard? Absolutely. The seat clips on and off easily, so you can paddle standing in SUP mode and switch to seated kayak mode whenever you like — even on the same trip. Does it come with a paddleboard? No. The POP kayak paddle and seat set is a conversion bundle (seat and paddle only), designed to work with the paddleboard you already own.

Adjustable. Lightweight. Ready to Explore. The POP Vamo Adjustable Fiberglass Kayak Paddle puts a perfectly tuned paddle in your hands every time you hit the water. With a quick turn of the lever lock, VAMO's kayak paddle adjusts in length and blade angle, so you get a large number of options to choose from to make your kayak perfect for you. One paddle replaces the whole rack: tune it tight for a narrow sit-in kayak, stretch it out for an open water tour, then reset it again tomorrow when your setup changes. That flexibility is exactly why this adjustable fiberglass kayak paddle shines on the water. The 240 to 260cm range works perfectly with kayak fishing and SUPs, because these boats and boards have adjusting seats that change the angle of the paddler, which changes the length you actually want in your hands. Light enough to swing all day, tough enough to keep up with you, it's the kayak paddle built for people who'd rather keep exploring than keep compromising. Perfect for kayaks and kayak kits on SUPs, the POP Vamo adjustable fiberglass kayak paddle is the last paddle your setup will need. Key Features Lever Lock Adjustment: Change length and blade angle in seconds with a single, secure twist without any tools. Adjustable Length (240–260cm): Fine-tune your reach to match your boat, your seat height, and your body for a comfortable, efficient stroke. Adjustable Blade Angle (Feathering): Set your preferred blade offset to cut wind resistance and reduce wrist strain. Lightweight Fiberglass Shaft: A fiberglass composite shaft delivers strength and durability while keeping the paddle light for long days on the water. Asymmetrical ABS Blades: Rigid, molded blades give clean, powerful catches and smooth releases on every stroke. Built for Versatility: Ideal for touring kayaks, sit-in kayaks, kayak fishing, and stand-up paddle boards. Specifications Material: Fiberglass composite shaft Asymmetrical Blade: ABS rigid molded Adjustable Length: 240–260 cm Blade Angle: Adjustable / feathering Adjustment System: Lever lock Paddle Type: Two-piece adjustable Best For: Touring kayaks, sit-in kayaks, kayak fishing, and SUPs Frequently Asked Questions Is the POP Vamo Adjustable Fiberglass Kayak paddle good for kayak fishing? Yes. The adjustable 240–260cm length lets you compensate for the higher, angle-adjusting seats common on fishing kayaks, so you get the perfect reach and a comfortable stroke all day. What length should I choose? Set it anywhere from 240–260cm. Taller paddlers, wider boats, and higher seats generally call for a longer setting. Because the length adjusts, you can experiment until it feels just right. How does the adjustment work? A simple lever lock loosens the shaft so you can slide it to your desired length and rotate the blades to your preferred angle, then locks it firmly back in place. Why choose a fiberglass paddle? Fiberglass offers an excellent balance of low weight, strength, and durability, giving you smoother, more efficient strokes and less fatigue compared to heavier aluminum paddles. Can I use it with a SUP (stand-up paddle board)? Absolutely. The POP Vamo adjustable fiberglass kayak paddle is perfect for kayaks and kayak kits on SUPs, and the adjustable length adapts as your board's seat or paddling angle changes.

Attach. Sit. Explore. Some of the best days on the water happen slowly. With the POP Kayak Seat, your stand-up paddleboard becomes a relaxed, seated ride in minutes, so you can drift through a quiet cove, cast a line, or simply soak in the calm without your legs ever asking for a break. It's the easiest way to turn the SUP you already love into two boards in one, no second watercraft, no compromise, just more reasons to stay out longer. This paddleboard kayak seat is made for paddlers who want comfort to keep pace with adventure, whether you're introducing the kids to the water or chasing the horizon solo. If standing all day has ever cut a trip short, this is the upgrade that changes everything. Clip it on, settle in, and rediscover how good a long, easy paddle can feel. Your next outing on the water just got a whole lot more inviting. Key Features Universal D-ring Attachment: Fits virtually any paddleboard you already own. So, no new gear is required. Ergonomic Back Support: Paddle longer distances without fatigue or lower back strain. Lightweight and Packable: Stows easily on your board or in a bag without adding bulk to your kit. Stable Seated Position: Stay balanced and in control even on open water or mild chop. Instant Conversion, No Tools: Switch between standing and sitting in seconds and paddle your way. Specifications Type: Universal sit-down kayak seat for stand-up paddleboards Compatibility: Any SUP or paddleboard with standard front and rear D-rings Attachment system: 4-point adjustable straps with quick-release buckles Outer material: Water-resistant 600D polyester Padding: High-density EVA foam seat base and backrest Backrest height: Approx. 16 in (40.6 cm) for full lower- and mid-back support Adjustable straps: Yes — fully tunable for fit and seating angle Weight capacity: Up to 330 lbs (150 kg) Color: Black / charcoal Care: Rinse with fresh water after use, air dry Frequently Asked Questions Will the POP Kayak Seat fit my paddleboard? If your board has standard front and rear D-rings (which the vast majority of SUPs do), the seat will fit. The four adjustable straps clip directly to those rings, so there's no drilling, gluing, or permanent modification required. Do I need any tools to install it? None at all. The seat attaches in minutes using quick-release buckles. You can switch between standing and seated paddling in seconds, right out on the water. Will it slide around or tip me off balance? No. Once the four straps are tensioned, the seat holds a stable, low-profile position that keeps you centered. It's designed to stay secure even on open water or mild chop. Is it comfortable enough for long paddles? Yes, that's the whole point. The high-density EVA padding and ergonomic backrest support your lower and mid back so you can paddle farther without fatigue or strain. Can I leave it on my board, or should I remove it? Either works. The POP kayak seat is light and packable, so you can stow it on the board, toss it in a bag, or leave it attached between sessions. Just rinse it with fresh water and air dry after use to keep it in top shape.

Roll. Carry. Go. Anyone who has wrestled a damp paddleboard back into a too-small bag knows how a great day can sour in the parking lot, usually with gear left behind because nothing else would fit. The POP iSUP backpack with wheels ends that struggle for good. This rolling paddleboard travel bag was built roomy on purpose, so your board and all its gear slide in without a fight and come out ready for the water. Roll it up, drop it in, zip it shut, and you're done. Getting there is the easy part, too. Glide it across airport floors and trailheads, then switch to backpack mode the moment a remote launch calls for a hike. Tough enough to shrug off pavement, gravel, and baggage handlers alike, this inflatable SUP bag is made to travel as hard as you do. For wandering paddlers and weekend explorers who want their board wherever they go, the POP iSUP backpack with wheels finally makes the journey feel effortless. Key Features Generous Capacity: Holds inflatable boards up to 11'6" plus your pump, paddle, fins, and personal gear, so nothing gets crammed or left at home. Easy Fit Every Time: Sized so your board slides back in without the wrestling match, no perfect compression required. Rugged Rolling Wheels: Built for airports, parking lots, and trails so you can roll the full load instead of hauling it on your back. Backpack Straps for Hiking: Padded shoulder and hip straps distribute weight evenly for comfortable carries into backcountry lakes and remote spots. TSA Check-In Friendly: Sized as regular baggage, so you can fly with your board and skip oversized fees and special handling. Rip-Stop Fabric Build: Durable construction stands up to dragging, tossing, and travel abuse, trip after trip. Non-Corrosive Plastic Zipper: Heavy-duty and salt-resistant, so it won't corrode the way metal zippers do. Specifications Capacity: Inflatable boards up to 11'6" Material: Rip-stop fabric Zipper: Heavy-duty plastic (non-corrosive) Carry Options: Wheels, shoulder straps, hip straps Use: Airport travel, hiking, trails, beach transport Frequently Asked Questions Will my 11' board fit in the POP iSUP backpack with wheels? Yeah, it holds boards up to 11'6", so an 11' board fits with room to spare for your pump, paddle, and other gear. Can I check this on a flight? Yes, it's TSA-friendly and sized for regular baggage check-in. You won't need to pay oversized baggage fees or deal with special handling. Is it actually easy to fit the board back in? That's the whole point. The bag is sized generously, so you're not fighting to compress everything perfectly. Roll it up, put it in, zip it. Done. Can I carry this as a backpack? Absolutely. The POP iSUP backpack with wheels has shoulder straps and hip straps for backpack-style carrying when you need to hike to remote launch spots or can't roll it. Will the wheels handle rough terrain? They're designed for trails, sidewalks, and airport floors. Not mountain bike terrain, but they handle gravel paths, parking lots, and uneven surfaces fine.

Click. Lock. Paddle. Nothing should stand between you and the water, least of all a fiddly fin screw you dropped in the sand. The POP 9" Click-In SUP Fin solves that for good. This all-around center fin slides into any rigid or inflatable POP paddleboard and locks into place in a single motion, so you go from car to current in seconds. No screwdriver, no loose hardware, no kneeling on the beach trying to line up a tiny thumbscrew while the perfect window slips away. Smart paddlers keep a spare, and this is the one to have ready. The POP 9" click-in SUP fin is a cheap insurance against a lost or cracked fin ever costing you a day on the water, and the quick click-in design makes swapping it a non-event. Stash one in your gear bag, and you're always set to launch. For families and weekend adventurers who'd rather be paddling than fussing over gear, this replacement paddle board fin is an easy yes. Key Features All-Around Fin Template: A versatile shape that tracks straight for distance paddling while staying nimble enough for turns and everyday recreational use. Wide Compatibility: Fits most longboards and standup paddleboards with Universal or US fin boxes, so it works far beyond just POP boards. Click-In, Ready to Ride: Snaps securely into the fin box with no screws required, getting you on the water faster than any traditional fin. Tool-Free Setup: Insert it into rigid or inflatable POP paddleboards by hand, with no hardware to carry or lose. Replacement or Spare: Fins go missing, get left behind, or take damage in shallow water. A backup keeps you paddling instead of sitting on the sidelines. Specifications Size: 9 inches Shape: All-around template Compatibility: Universal and US fin boxes Installation: Tool-free click-in system, no fin screws needed Use: Rigid and inflatable paddleboards, longboards Frequently Asked Questions How does the click-in system work? The POP 9" click-in SUP fin slides into a Universal or US fin box and locks in with a single click. There are no screws to tighten, so it's ready to ride the moment it's seated. Will this fit my paddleboard? If your rigid or inflatable board has a Universal or US fin box, it should fit. This is the standard system used on most longboards and standup paddleboards. Do I need any tools or hardware? None. The whole point of the click-in design is tool-free, hardware-free installation. Just press it into place by hand. What does "all-around shape" mean? It's a versatile fin built for general paddling, fitness, and recreational use. It tracks well and turns easily, making it a great fit for most everyday paddlers. Can I use the POP 9" Click-In SUP Fin as a spare? Absolutely. It's an ideal backup to keep in your gear bag for when a fin gets lost, left behind, or damaged on the water.

Replaceable. Reliable. Ready to Paddle. Few things end a paddle session faster than reaching for your fin and finding it gone. They slip off during transport, vanish into the sand, or take a hit in shallow water, and suddenly your board wanders instead of tracking straight. The POP 10" iSUP center fin puts you back in control. Built for everyday recreational paddling, this all-around fin keeps your inflatable paddleboard gliding smoothly whether you're cruising the coastline or logging quiet miles across the lake. Smart paddlers keep a spare, and the POP 10" iSUP center fin is the one to have. Think of it as cheap insurance against a lost or damaged fin ever costing you a day on the water. Stash one in your gear bag, leave another at the dock, and you're always ready to launch the moment the wind feels right. For families and weekend adventurers who'd rather be paddling than fussing over gear, it's an easy yes. Key Features All-Around 10" Shape: Delivers solid tracking for distance paddling while staying maneuverable enough for turns and general recreational use. Fits Universal & US Fin Boxes: Compatible with most inflatable paddleboards on the market, not just POP boards. So, you can shop with confidence. Thumbscrew & Washer Included: Everything you need for installation comes in the box. No hunting for hardware or missing parts. Tool-Free Installation: Swap or reinstall right at the beach by hand. No need to pack a screwdriver in your gear bag. Replacement or Spare: Fins get lost, damaged, or left behind. A backup keeps you on the water instead of on the sidelines. Specifications Size: 10 inches Shape: All-around template Compatibility: Universal and US fin boxes Installation: Tool-free thumbscrew system Use: Inflatable paddleboards, longboards Frequently Asked Questions Will this fit my inflatable paddleboard? If your board has a Universal or US fin box with thumbscrew attachment, yes. This is the standard system used on most inflatable SUPs. Do I need tools to install the POP 10" iSUP Center Fin? No. The thumbscrew design means you hand-tighten it into the fin box. No screwdriver needed. What does "all-around shape" mean? It's a versatile fin design that works for general paddling, fitness, and recreational use. Not specialized for racing or surfing, but good for everything else. Is 10 inches the right size? For most recreational paddling, yes. It's the standard size that provides good tracking without making the board hard to turn. Longer fins are for racing, shorter for surfing. Will this work on rigid paddleboards? The POP 10" iSUP center fin can work on rigid boards with Universal or US fin boxes, but most rigid boards use different fin systems. This is primarily designed for inflatable SUPs.

Lighter. Stiffer. Made to Glide. Most paddlers don't realize how much their gear is holding them back until they switch. Pick up the POP Ratchet 2-Piece Full Carbon Fiber SUP Paddle and the difference lands the moment it's in your hands; it feels almost weightless, yet every stroke bites cleaner and pushes your board further. That's the magic of true carbon. The energy you put in goes straight into the water instead of disappearing into a flexing shaft, so you cover more distance, stay fresher, and keep your form dialed long after others have called it a day. This is the stand-up paddleboard paddle for people who actually love being on the water and want gear that keeps up. Whether you're chasing a sunrise session, logging fitness miles, or exploring a new shoreline with the family, the POP Ratchet 2-Piece full carbon fiber SUP paddle rewards you with effortless glide and total control. Upgrade once, feel it every session, and wonder how you ever paddled without it. Key Features Full Carbon Construction (Shaft & Blade): You're getting the real deal, not a hybrid with plastic parts. This is the lightest, stiffest paddle we make. Reduced Arm Fatigue: The noticeably lighter weight saves your arms on long paddles. After an hour on the water, you'll feel the difference compared to heavier paddles. Stiff Blade for Power Transfer: Your effort goes into moving the board forward, not flexing the paddle. Every stroke counts. Responsive, Connected Feel: Better control and feedback from the water. You can feel exactly what the paddle's doing, which sharpens your technique. 2-Piece Breakdown: Fits in your car trunk or closet. Premium performance without needing a roof rack or dedicated storage space. Specifications Material: 100% full carbon fiber (shaft and blade) Construction: 2-piece breakdown design Length: Adjustable, approximately 67"–86" (170–218 cm) Adjustment System: Push-pin / lever-lock for quick, secure length changes Blade Area: Approx. 90 sq. in., optimized for recreational, fitness, and touring strokes Grip: Ergonomic palm grip Paddle Weight: Approx. 24 oz (680 g) Best For: Recreational paddling, fitness sessions, distance touring, recreational racing Skill Level: Intermediate to advanced (great upgrade for regular paddlers) Frequently Asked Questions Is the POP Ratchet 2-Piece full carbon fiber SUP paddle really worth the price? If you paddle regularly, yeah. The weight and stiffness difference is real, and you'll feel it every session. If you only paddle once a month, you might be fine sticking with fiberglass. How much lighter is carbon than fiberglass? Significantly lighter. You'll notice it immediately when you pick it up, and you'll definitely notice it after 30–45 minutes of paddling. Less arm fatigue means longer, more enjoyable sessions. What makes this different from cheaper carbon paddles? Full carbon construction—both shaft and blade. Some "carbon" paddles pair a carbon shaft with a plastic blade. This one is all carbon, which is exactly why it performs better. Will this make me a better paddler? It'll make paddling easier and give you better feedback, which helps you improve your technique. It won't magically fix bad form, but think of it as removing the obstacles to improvement. Can I use the POP Ratchet 2-Piece full carbon fiber SUP paddle for racing? It's not a dedicated race paddle, but it's plenty good for recreational racing and fitness paddling. Serious racers might prefer a fixed-length, race-specific paddle, but the Ratchet handles everything else with ease.

The Aqua Marina 90L Premium Luggage Bag with Rolling Wheel in Raspberry is the perfect companion for your next adventure. This wheely-backpack has an easy entry zipper, padded straps, belts and accessory compartments to keep all of your items secure and organized. The bag is made from durable materials that are designed to last, so you can be sure that it will withstand the rigors of travel. The rolling wheel makes it easy to transport your luggage wherever you go. The bag also features a number of pockets and compartments for extra storage space. You can easily store small items such as passports, tickets, and other important documents in the front pocket. There are also two side pockets for additional organization options. The adjustable shoulder straps make it comfortable to carry around even when fully loaded. Whether you're going on a weekend getaway or a longer trip, the Aqua Marina 90L Premium Luggage Bag with Rolling Wheel is the perfect choice for any traveler looking for convenience and style. With its sleek design and superior quality construction, this bag will ensure that all of your belongings stay safe and secure during your travels. Specifications Measurements: 2’11” x 1’4” x 10” ( 90 × 40 × 25 cm) Padded shoulder straps Inner /outer storage pockets Extra belts on shoulders and hip Available in Raspberry and Blueberry colors